Residential floor

Home / Alkalmazások / Residential floor
Írjon nekünk!
Message can not be empty!

General information

Non-insulated floors to the soil or unheated rooms can be responsible for a significant heat loss. Besides reducing the heat loss, proper insulation of floors helps to increase the overall comfort significantly. Additionally, the heat storage capacity of an insulated floor is utilized more effectively.

RAVATHERM™ XPS offer several advantages for insulation of floor structures:

  • High load-bearing capacity due to high compressive strength and E-modulus,
  • Low compression,
  • Reduced thickness of load-distributing layer (screed),v
  • Long-term high insulation value,
  • Simple floor build-up,
  • Easy and fast installation,
  • Safe floor structure long-term.

Other information

SAFE AND EFFICIENT FLOOR INSULATION

The advantages of the extruded polystyrene foam can be utilized especially at ground-bearing floor structures. Besides a traditional insulated floor build-up – where RAVATHERM™ insulation is placed above the waterproofing membrane laid on concrete slab – the negligible water absorption and the zero capillarity of extruded polystyrene foam enable inverted floor insulation method.

Floor insulation materials are often subject to increased long-term static and dynamic loads. High compressive strength and minimum deformation are basic requirements.

For more than 40 years XPS insulation products have been successfully used in applications being exposed to extreme stresses:

  • insulation of cold-store floors,
  • airfield hangar floors,
  • parking decks
  • and as frost heave protection of railway substructures.

INSULATION OF RESIDENTIAL FLOORS

Other

RAVATHERM™ XPS boards are placed directly on 10-15 cm compacted and leveled hardcore, under the reinforced concrete floor slab. Between the insulation and the concrete slab PE-foil separation layer is placed, which plays also a role as basic protection of moisture transport. However, in case of damp soil, waterproofing membrane should be installed on the top of the concrete slab.

RAVATHERM™ XPS boards offer efficient and longterm solution also for insulation of intermediate floors:

  • floors above unheated spaces,
  • heated floors,
  • attic floors.

ÉNGY, TERC code

  • Thermal insulation of a slab cooling from below I.
    PRODUCT NAMETHICKNESSÉNGY CODE (MV)TERC CODE
    RAVATHERM XPS 300WB3048-007-0572972 48-007-41.3.1.3-0110162
    RAVATHERM XPS 300WB4048-007-057298448-007-41.3.1.3-0110163
    RAVATHERM XPS 300WB5048-007-057299648-007-41.3.1.3-0110164
    RAVATHERM XPS 300WB6048-007-057300148-007-41.3.1.3-0110165
    RAVATHERM XPS 300WB8048-007-057301348-007-41.3.1.3-0110166
    RAVATHERM XPS 300WB10048-007-057302548-007-41.3.1.3-0110167
    RAVATHERM XPS 300WB12048-007-243354048-007-41.3.1.3-0110169
    RAVATHERM XPS 300WB14048-007-243355248-007-41.3.1.3-0110170
    RAVATHERM XPS 300WB15048-007-396113048-007-41.3.1.3-0110176
    RAVATHERM XPS 300WB16048-007-396114248-007-41.3.1.3-0110177
    RAVATHERM XPS 300WB18048-007-396115448-007-41.3.1.3-0110178
    RAVATHERM XPS 300WB20048-007-396116648-007-41.3.1.3-0110179
    RAVATHERM XPS 300WB22048-007-438574648-007-41.3.1.3-0110180
  • Thermal insulation of a slab cooling from below II.
    PRODUCT NAMETHICKNESSÉNGY CODE (MV)TERC CODE
    RAVATHERM XPS 300WB3048-007-057509548-007-41.3.2.2-0110162
    RAVATHERM XPS 300WB4048-007-057510548-007-41.3.2.2-0110163
    RAVATHERM XPS 300WB5048-007-057511048-007-41.3.2.2-0110164
    RAVATHERM XPS 300WB6048-007-057512248-007-41.3.2.2-0110165
    RAVATHERM XPS 300WB8048-007-057513448-007-41.3.2.2-0110166
    RAVATHERM XPS 300WB10048-007-057514648-007-41.3.2.2-0110167
    RAVATHERM XPS 300WB12048-007-243369048-007-41.3.2.2-0110169
    RAVATHERM XPS 300WB14048-007-243370048-007-41.3.2.2-0110170
    RAVATHERM XPS 300WB15048-007-396117148-007-41.3.2.2-0110176
    RAVATHERM XPS 300WB16048-007-396118348-007-41.3.2.2-0110177
    RAVATHERM XPS 300WB18048-007-396119548-007-41.3.2.2-0110178
    RAVATHERM XPS 300WB20048-007-396120548-007-41.3.2.2-0110179
    RAVATHERM XPS 300WB22048-007-438575148-007-41.3.2.2-0110180
  • Attic thermal insulation 48-007-41.1.5.3
    PRODUCT NAMETHICKNESSÉNGY CODE (MV)TERC CODE
    RAVATHERM XPS 300SL3048-007-438562548-007-41.1.5.3-0110112
    RAVATHERM XPS 300SL4048-007-438563048-007-41.1.5.3-0110113
    RAVATHERM XPS 300SL5048-007-438564248-007-41.1.5.3-0110114
    RAVATHERM XPS 300SL6048-007-438565448-007-41.1.5.3-0110115
    RAVATHERM XPS 300SL8048-007-438566648-007-41.1.5.3-0110116
    RAVATHERM XPS 300SL10048-007-438567148-007-41.1.5.3-0110117
    RAVATHERM XPS 300SL12048-007-438568348-007-41.1.5.3-0110118
    RAVATHERM XPS 300SL14048-007-438569548-007-41.1.5.3-0110119
    RAVATHERM XPS 300SL15048-007-438570548-007-41.1.5.3-0110120
    RAVATHERM XPS 300SL16048-007-438571048-007-41.1.5.3-0110121
    RAVATHERM XPS 300SL18048-007-438572248-007-41.1.5.3-0110122
    RAVATHERM XPS 300SL20048-007-438573448-007-41.1.5.3-0110123
    RAVATHERM XPS 300SL22048-007-438558648-007-41.1.5.3-0110103
    RAVATHERM XPS 300SL24048-007-438559148-007-41.1.5.3-0110104
    RAVATHERM XPS 300SL26048-007-438560148-007-41.1.5.3-0110106
    RAVATHERM XPS 300SL28048-007-438561348-007-41.1.5.3-0110107

Tender text

  • General floor structures

    Hőszigetelés elhelyezése talajon fekvő általános padlószerkezetben sima felületű RAVATHERM
    XPS 300 SL extrudált polisztirolhab lemezzel,

    30-40 mm: λD=0,033 W/mK,
    XPS – EN13164 – T1 – CS(10\Y)300 – CC(2/1,5/50)130 – DS(70,90) – DLT(2)5 -WD(V)3 – WL(T)0,7 – FTCD1
    50-60 mm: λD=0,033 W/mK,
    XPS – EN13164 – T1 – CS(10\Y)300 – CC(2/1,5/50)130 – DS(70,90) – DLT(2)5 -WD(V)2 – WL(T)0,7 – FTCD1
    80 mm: λD=0,033 W/mK,
    XPS – EN13164 – T1 – CS(10\Y)300 – CC(2/1,5/50)130 – DS(70,90) – DLT(2)5 -WD(V)1 – WL(T)0,7 – FTCD1
    100-120 mm: λD=0,034 W/mK
    XPS – EN13164 – T1 – CS(10\Y)300 – CC(2/1,5/50)130 – DS(70,90) – DLT(2)5 -WD(V)1 – WL(T)0,7 – FTCD1
    140-280 mm: λD=0,035 W/mK
    XPS – EN13164 – T1 – CS(10\Y)300 – CC(2/1,5/50)130 – DS(70,90) – DLT(2)5 -WD(V)1 – WL(T)0,7 – FTCD1