Socle insulation

Home / Alkalmazások / Socle insulation
Írjon nekünk!
Message can not be empty!

General information

Without the professionally developed thermal protection of the building socle, the thermal insulation effectiveness for the upward walls, floors on the soil, and basement sidewalls decreases significantly.
The application of the moisture and frost resistant, high strength RAVATHERM™ XPS 300 WB closed-cell polystyrene foam thermal insulation provides a lasting and efficient solution, even as a supplement to ventilated façade systems prepared using other thermal insulation materials.
RAVATHERM XPS 300 WB socle thermal insulation must be lead up to a height of at least 30 cm above the level of the surrounding terrain due to capillary action and splashing moisture.

Other information

The thermal insulation of the building socle is subjected to intense stresses: soil moisture, precipitation, splashing water, mechanical impacts, humic acids, etc., therefore long-lasting reliable operation can only be ensured by choosing the heat insulating material that meets the requirements. The application of the RAVATHERM XPS 300 WB extruded polystyrene thermal insulation foam provides a lasting and efficient solution, as a result of the beneficial material characteristics:

  • closed-cell structure – negligible moisture uptake, frost resistance
  • high strength, flexible rigidity – resistance to mechanical impacts
  • rough surface – high strength adherence to concrete, mortars and solvent-free adhesives

ÉNGY, TERC code

  • Building plinth thermal insulation
    PRODUCT NAMETHICKNESSÉNGY CODE (MV)TERC CODE
    RAVATHERM XPS 300WB3048-007-056242448-007-21.21.1-4110162
    RAVATHERM XPS 300WB4048-007-056243648-007-21.21.1-4110163
    RAVATHERM XPS 300WB5048-007-056244148-007-21.21.1-4110164
    RAVATHERM XPS 300WB6048-007-056245348-007-21.21.1-4110165
    RAVATHERM XPS 300WB8048-007-056246548-007-21.21.1-4110166
    RAVATHERM XPS 300WB10048-007-056247048-007-21.21.1-4110167
    RAVATHERM XPS 300WB12048-007-243079448-007-21.21.1-4110169
    RAVATHERM XPS 300WB14048-007-243080448-007-21.21.1-4110170
    RAVATHERM XPS 300WB15048-007-396040648-007-21.1.1.4-0110176
    RAVATHERM XPS 300WB16048-007-396041148-007-21.21.1-0110177
    RAVATHERM XPS 300WB18048-007-396042348-007-21.21.1-0110178
    RAVATHERM XPS 300WB20048-007-396043548-007-21.21.1-0110179
    RAVATHERM XPS 300WB22048-007-438520648-007-21.21.1-0110180
    RAVATHERM XPS 200PB2048-007-055779648-007-21.1.1.4-0110161
  • Thermal insulation of building plinth with mounted facade cladding
    PRODUCT NAMETHICKNESSÉNGY CODE (MV)TERC CODE
    RAVATHERM XPS 300SL3048-007-055927348-007-21.1.1.7.3-0110112
    RAVATHERM XPS 300SL4048-007-055928548-007-21.1.1.7.3-0110113
    RAVATHERM XPS 300SL5048-007-055929048-007-21.1.1.7.3-0110114
    RAVATHERM XPS 300SL6048-007-055930048-007-21.1.1.7.3-0110115
    RAVATHERM XPS 300SL8048-007-055931248-007-21.1.1.7.3-0110116
    RAVATHERM XPS 300SL10048-007-055932448-007-21.1.1.7.3-0110117
    RAVATHERM XPS 300SL12048-007-055933648-007-21.1.1.7.3-0110118
    RAVATHERM XPS 300SL14048-007-055934148-007-21.1.1.7.3-0110119
    RAVATHERM XPS 300SL15048-007-242916648-007-21.1.1.7.3-0110120
    RAVATHERM XPS 300SL16048-007-242917148-007-21.1.1.7.3-0110121
    RAVATHERM XPS 300SL18048-007-242918348-007-21.1.1.7.3-0110122
    RAVATHERM XPS 300SL20048-007-242919548-007-21.1.1.7.3-0110123
    RAVATHERM XPS 300SL22048-007-438508048-007-21.1.1.7.3-0110103
    RAVATHERM XPS 300SL24048-007-438509248-007-21.1.1.7.3-0110104
    RAVATHERM XPS 300SL26048-007-438510248-007-21.1.1.7.3-0110106
    RAVATHERM XPS 300SL28048-007-438511448-007-21.1.1.7.3-0110107
    RAVATHERM XPS 200PB2048-007-057296048-007-41.3.1.3-0110161

Standard text

  • Facade thermal insulation – building plinth

    Hőszigetelés elhelyezése épületlábazaton ragasztva, érdesített felületű („nápolyi-mintás”)
    RAVATHERM XPS 300WB extrudált polisztirolhab lemezzel,

    30-80 mm-ig: λD=0,033 W/mK, EN13164 : T3 – CS(10\Y)300 – DS(70,90) – WL(T)0.7 – TR400
    100 mm: λD=0,034 W/mK, EN13164 : T3 – CS(10\Y)300 – DS(70,90) – WL(T)0.7 – TR400
    120 mm : λD=0,034 W/mK, EN13164 : T3 – CS(10\Y)300 – DS(70,90) – WL(T)0.7 – TR200
    140-220 mm-ig: λD=0,035 W/mK, EN13164 : T3 – CS(10\Y)300 – DS(70,90) – WL(T)0.7 – TR200

    A ragasztóanyag, a homlokzati dübelek, valamint a felületképzéshez szükséges lábazati vakolat
    külön tételben kerülnek kiírásra.