Waterproofing Admixtures

MASTERPEL 790

MasterPel 790 (formerly RHEOMAC 790) is liquid free chloride emulsion, which when added
to the concrete mix gives characteristics sealing immediately after maintenance. The use of MasterPel 790 allows its reduction water penetration into the concrete when it harden. MasterPel 790 does not contain chlorine and meets the requirements of UNI EN 934-2 and is compatible with all responsive cements to UNI EN 197-1 and ASTM.

MASTERPEL 793

MasterPel 793 is a highly penetrative low viscosity emulsion for surface application to concrete, masonry and blockwork surfaces, or for use as a high performance integral waterproofer for wet or dry cast concrete. On curing it provides a waterproof surface/product with minimum effect on the original appearance and texture.

MasterPel 793 is suitable for surface use on decorative stone and concrete; drives and forecourts; patios and paths; masonry and brickwork; concrete walls.

MasterPel 793 is also suitable for integral use cast stone; concrete bricks, blocks, block paving; precast wet or dry concrete.

MASTERLIFE WP 1000

MasterLife WP 1000 is a specific integral crystalline waterproofing admix to be added to the concrete mix, to impart
waterproofing properties due to active chemicals that react with the moisture in fresh concrete to generate a non-soluble crystalline formation throughout the capillary pores of cement matrix.

MasterLife WP 1000 consists of Portland cement, selected filler and fine sand and various active, proprietary chemicals that react with water and moisture higher that 95% closing and sealing capillary porosity and micro-cracks lower that 0,5 mm.

The use of MasterLife WP 1000 is advised where a waterproof concrete is required, durable to deterioration due to harsh environmental conditions that resists to hydrostatic pressure from either positive or negative surface of the concrete slabs