StoperProof V3mm
STOPERproof V 3MM is designed for single layer waterproofing applications on single side vertical walls.
- Single layer
- Easy peel and apply design
- Superior tear and impact resistance
- Easy and fast one-time application
- Saving time, cost and labor
With its ultra-flexible, elastomeric special formulation, it provides excellent and continuous bonding to freshly poured concrete. Its composite polyester felt provides superior resistance to penetrating elements and impacts. STOPERproof V3MM facilitates waterproofing of vertical single face formworks.
FEATURES
Bitumen structure: High performance elastomeric membrane designed with a special formulation of bitumen modified with a high percentage of SBS and specific thermoplastic polymers.
Reinforcement: Composite polyester reinforcement
Bottom Surface: Siliconized PP film
Overlap: 5cm self-adhesive + 5cm PE film
ADVANTAGES
- Due to the hydration heat generated during the curing of freshly poured concrete, its special formulation provides continuous, homogeneous and perfect bonding to the curtain concrete.
- It prevents air and water penetration.
- Any possible small leakage is blocked at the exact point and thus easy to correct by grouting.
- Superior resistance to tearing and impact.
- Superior resistance to penetrating elements on the construction site.
- When the concrete starts to cure, the fine sandy surface softens slightly with the hydration heat, allowing the membrane to bond perfectly to the concrete.
- The siliconized PP film on the bottom surface is easily peeled off and the self-adhesive surface is easily bonded onto a surface such as OSB, leveling prepared according to the construction site detail.
- Self-adhesive and torch-applied overlaps